Battery Adapter Compatible for Hitachi 18v Flat Push Type Lithium-ion Battery Base Black

• --Flat push-type battery holder, compatible for Hitachi 18V lithium-ion battery.
• --This is not a charger, it only outputs battery voltage and power directly from the battery.
• --The adapter has been installed with 140mm No. 14 wire.
• --Practical DIY battery adapter, safe and reliable, easy to assemble and use.
• --The battery and the adapter are highly matched, and will not fall off and shake during use.

Description:

Product name: Battery Adapter

Material: ABS

Usage: The battery adapter/connector has been tested and can be used compatible for Hitachi HITACH 18V flat push lithium batteries. Including models: BSL1815X, BSL1830, 330067, 330068, 330139, 330557 18V lithium battery.

Precautions:

1. Do not use this adapter to charge the battery.

2. Do not short-circuit the battery or continuously consume more than 20 amperes of current.

3. Disconnect the battery before the battery reaches 14 volts (extend battery life).

4. Do not charge with 100% power for a long time. It is recommended to store the battery with 70% power (to extend battery life).

Packing list:

1 x Battery Adapter

Note:

The color deviation is subject to actual system configuration and 1-3cm slight dimension difference is allowed due to manual measurement. Please refer to the size chart based on your actual figure.