ANENG Cg01 Coating Thickness Gauge LCD Display High-precision Thickness Tester Car Painting Depth Gauge

• --High measuring accuracy and wide measuring range: 0~1500um (0~59.0mil).
• --With 6 groups of data group storage function, it is convenient to count and compare the data and deviation of different parts.
• --It has a 4-point smooth calibration function, which makes the measured data more accurate.
• --With upper and lower limit setting and prompt function, the red and green two-color LED lights can flash, and the display screen prompts the state of over limit.

Features:
1. This meter can measure the thickness of the surface coating of magnetic metal (iron-based) and non-magnetic metal (non-ferrous).
2. Dot matrix LCD liquid crystal display, you can see the data clearly even when the backlight is turned off during the day, and it saves electricity. In addition, the backlight can adjust the brightness.
3. With gravity sensing function, it can automatically rotate the content of the display to keep the direction consistent with gravity, making it easy to read the measurement data.
4. It is suitable for coating, metal processing, sales measurement, automobile paint inspection, second-hand automobile, accident vehicle assessment and other industries.

Description:
Name: Thickness Gauge 

Use: Coating thickness detetion
Unit switch: um/mil
Type: lron and non-iron
Battery: AAA x 2 (Not included)
Back light: 10 levels adjustable/close
Data storage: 6 groups X 100 per group
Calibration points: 4 calibration points linear smoothing calculation
Measuring range: 0-1500um(0-59.0mil)
Measurement accuracy: ±(3%H+1um)【±(3%H+0.04mil)】
Data group storage: 6groups X 100 per group
Minimum convex radius of curvature: 5mm(197mi)
Minimum concave radius of curvature: 50mm(1970mil)
Minimum measuring area diameter: 20mm(787mil)
Minimum substrate thickness: 0.5mm(19.7mil)
Measurement method: Single measurement/continuous measurement
Display rotation angle: 0°, 90°, 180°, 270°/closure

Packing list:
1 x CG01 Thickness gauge(without batteries)
2 x Iron base piece
1 x U disk
1 x Data cable
5 x Calibration piece
1 x Packing box
1 x Storage bag
1 x Instruction manual
Note:
Different displays may cause the color of the item in the picture a little different from the real thing. 
Manual measuring,please allow 1~3mm error,thank you.