Qrm Eliminator X Phase 1-30 Mhz Hf Bands Finished machine

• Aluminum shell, front and rear baffles are: epoxy glass fiber board FR4.
• The QRM canceller is inserted into the feeder of the antenna from the trx without any other modifications to the radio.
• The box has a built-in PTT control to keep the canceller connected during transmission.
• However, an additional auxiliary receiving antenna is required, such as a 2m antenna or only a few meters of wires in a shed.
• The two antennas receive unwanted signals, resulting in different phases.

Description:

Product category:Eliminator box

Size: 125*110*51mm, excluding the joint part
Net weight:670g
Package weight: 850g

The QRM canceller now allows adjustment of the phase angle and amplification to cancel the unwanted signal before it reaches the receiver front end! It is based on a completely innovative concept and cannot be compared with the normal silencer performance.

Packing list:

QRM Eliminator box *1
PTT cable *1
DCplug int 2.1mm ext 5.5mm *1
SMA Tie Rod Antenna*1
UHF/SL16—SMA*3

Note: There is a 0.5-1mm deviation between the dial and the knob pointer.