Power Wheel Adapter Compatible for Metabo 18v Lithium Ion Battery Base Diy Adapter

• --Applicable compatible for Metabo 18v battery model: 625367000, 625368000, 321000480, 321000550, 625459000, BS18 LT, SB18 LT, SSD18 LT, SSW18 LT lithium battery.
• --There is a 30A fuse on the positive (red wire) of the adapter to prevent the battery and power supply equipment from being damaged by excessive current.
• --This is not a charger, it only outputs battery voltage and power directly from the battery.
• --Once the battery is turned on, it will be charged. so be safe.

Feature:

1. Once the battery is turned on, it will be charged. I know you don't short the poles on purpose, but if it does happen, it's always triggered by accident, so be safe and don't short the poles even by accident.
2. Disconnect the battery before it reaches 14 volts (to prolong battery life) Do not charge at 100% for a long time, it is recommended to store the battery at 70% (to prolong battery life).

Description:
Name: Adapter
Material: mold injection ABS+PC material
Wire: Silicone wire 3135 14AWG
Outlet length: about 150mm
Note: This adapter product cannot be used compatible for Metabo HPT 18v/36v lithium battery.
Packing list:
Adapter x 1
30A fuse x 3
Terminal block x 1
Note:
1. Due to manual measurement, please allow 1-3cm error. Make sure you don't mind before bidding.
2. Due to the difference of different monitors, the picture may not reflect the actual color of the product. Thanks.