DS213 MINI Digital Oscilloscope Portable LCD Display 4 Channel 15MHz 100MS/S USB Pocket-Sized Storage

• Synchronous mode: Auto, Normal, Single, None, Scan.
• Inbuilt 8MB U disk storage for waveform data and images.
• Rising/Falling Edge Trigger,Positive/Negative pulse width trigger.
• Auto Measurement: frequency, cycle time, duty cycle, DC RMS voltage/Vpp /Vmax/Vmin/Vavg.
• Math waveforms: [CH_A]+[CH_B], [CH_A]-[CH_B], [CH_C]|[CH_D], [CH_C]&[CH_D], RecA, RecB, RecC, RecD.
• Inbuilt signal generator/10Hz-1MHz square wave (duty adjustable) or 10Hz-20KHz Sine/Square/Triangle/Sawtooth wave.

Description:

Product Category: Mini Oscilloscope
Functionalities:
Store file as BMP, DAT, BUF, or CSV format
Synchronous mode: Auto, Normal, Single, None, Scan
Inbuilt 8MB U disk storage for waveform data and images
Rising/Falling Edge Trigger,Positive/Negative pulse width trigger
Auto Measurement: frequency, cycle time, duty cycle, DC RMS voltage/Vpp /Vmax/Vmin/Vavg
Math waveforms: [CH_A]+[CH_B], [CH_A]-[CH_B], [CH_C]|[CH_D], [CH_C]&[CH_D], RecA,  RecB, RecC, RecD
Inbuilt signal generator/10Hz—1MHz square wave (duty adjustable) or 10Hz—20KHz Sine/Square/Triangle/Sawtooth wave
Specifications:
ADC: AD9288:
Coupling:AC/DC:
CPU:ARM Cortex M3
FIFO & control: FPGA
Analog bandwidth:15MHz
Max sample rate:100MSa/s
Analog input impedance:1MΩ
Max sample memory depth:4K
2-Analog channel:[CH_A], [CH_B]
2-Digital channel:[CH_C], [CH_D]
Max input voltage: ±40V(X1 probe)
Vertical sensitivity:10mv/Div~10V/Div(1-2-5 sequence step)
Horizontal sensitivity:100nS/Div~1S/Div(1-2-5 sequence step)
Weight (metal case): 129g
Internal 1000mAh Lithium battery
Recharging through Mini USB port
Dimension (99.5mm X 58.5mm X 13.5mm)
3" Full Color TFT LCD Display(400X240 pixels)
Compliant with EU certification CE FCC

Packing list:

1 x DS213 Mini Oscilloscope (metal case black color)
1 x DSO Probe x1
1 x DSO Probe x10
1 x Safety Instruction
1 x Hex Key
1 x Micro USB

Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.