433Mhz LoRa Shield IOT Long Distance Wireless Lora Shield for Dragino Arduino Leonardo UNO Mega2560 Duemilanove Due

• Compatible with 3.3v or 5v I/O Arduino Board.
• Frequency Band: 915MHz/868 MHZ/433 MHZ (Pre-configure in factory).
• Low power consumption.
• Compatible with Arduino Leonardo, Uno, Mega, DUE.
• External Antenna via I-Pex connector.

Description:

Product category:Holder

 LoRa Shield  is a long range transceiver on a Arduino shield form factor and based on Open source library.The Shield allows the user to send data and reach extremely long ranges at low data-rates.It provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.
 LoRa Shield is based on Semtech SX1276/SX1278 chip, it targets professional wireless sensor network applications.

 Summary:
168 dB maximum link budget.
+20 dBm - 100 mW constant RF output vs.
+14 dBm high efficiency PA.
Programmable bit rate up to 300 kbps.
High sensitivity: down to -148 dBm.
Bullet-proof front end: IIP3 = -12.5 dBm.
Excellent blocking immunity.
Low RX current of 10.3 mA, 200 nA register retention.
Fully integrated synthesizer with a resolution of 61 Hz.
FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation.
Built-in bit synchronizer for clock recovery.
Preamble detection.
127 dB Dynamic Range RSSI.
Automatic RF Sense and CAD with ultra-fast AFC.
Packet engine up to 256 bytes with CRC.
Built-in temperature sensor and low battery indicator.

Package List:

1X LoRa Shield

Note:The colors deviation might differ due to different monitor settings, please kindly understand.