2pcs Mx50 Se Audio Power Amplifiers 2.0 Channels 100w Amplificador Diy Kit

• The lower distortion, better control and resolution.
• Single differential input, single-ended voltage amplifier stage, three-stage inverted Darlington output.
• The output stage uses the original KTB817, KTD1047.
• For PHILIPS KEC transistor, ST, EVOX producing CBB capacitor.KEMET, TDK monolithic capacitors.

Description:

Product category:MX50 SE 2 channels Power Amplifiers Audio Diy Kit or finished board

Supply Voltage : DC+ -15V to + - 45V,dual AC 12V- dual 32V

Output Power: 15-100W 8ohm (+ - 42V)

Voltage Gain : 34times

Input Sensitivity: 1.2V100W  8 ohm

SNR: More than 98DB

Distortion: less than 0.009 THD 1K HZ 10W

Output Stage quiescent current per channel Approximately 30MA

PCB Dimension: 77mm * 74mm

Installation: 649 669 must be installed on supporting the radiator.

After the installation does not require any adjustment, the quiescent current of each tube about 30MA. This version does not need to fly line. Just take two bassoon installed in the radiator can be.

Packing list:

1Pair MX50 SE 2 channels Power Amplifiers Audio Diy Kit or finished board

Note:The colors deviation might differ due to different monitor settings, please kindly understand.