12V IP67 Waterproof LED Power Supply Aluminum Alloy Transformer AC110 to 12 Volt DC Output

Using percentage of power supply is 80%, i.e the power of load is 240 watt, you should choose 300W output transformer, otherwise there is possibility to cause the earlier invalidation by person.

Automatic protection for: short circuit / overload / over voltage / high temp.

Wiring instruction for DC output: Please make the 3 outputs be joint to load while the load over 100W, this way be good for transformer's life span. Load's wattage not over 80% of rated power to be ideal performance.

Description:

Item type:power supply

DC voltage: 12V

Rated current: 5A

Current range: 0-5A

Rated power: 60W

Ripple and noise (maximum): 200mV

Setting, rise time: 100ms / 110VAC

Hold time: 80ms / 110VAC

Frequency range: 47~60Hz

Voltage range: 90~265VAC

Power factor (typical): PF> 0.5

Efficiency (typical): 80%

Safety standard: CE mark (LVD), IP67

Storage temperature and humidity: -40~ + 80°C, 10~90%RH

Operating temperature: -30~ + 60°C (reference output load derating curve)

Working humidity: 20~90% RH without condensation (waterproof)

Emc test standard: EN 55015-2006, EN 61547-1995 + A1-2000, EN 61000-3-2-2006, EN61000-3-2-1995 + A2-2005 EN 61347-1-2008 EN 61347-2-13 -2006

NOTE:

1. All parameters NOT specially mentioned are measured at 220VAC input, rated load and 25℃ of ambient temperature.

2. Ripple noise are measured at 20MHz of bandwidth by using a12 twisted pair-wire terminated with a 0.1uf 10uf parallel capacitor.

3. Tolerance: includes set up tolerance, line regulation and load regulation.

Package Include:

1 x product, 1 x Manual, 1 x box packaging

Note:

The colors deviation might differ due to different monitor settings.